Monday, May 16, 2011

Light Box


I saw this light box at ??? who the heck knows, I just spent the last hour trying to figure that out with no luck. I liked it so much I decided to make one of my own. Just a helpful hint before you get started, make sure you have somewhere to store a very large and very fragile box, if you breath on the thing it breaks. Just a fore warning. Moving on, mine works like a charm. It's not very hard to put together and is cheap to make. If you are like me who has a bright "wash out every picture" flash on your camera this will really help.

It looks like a worthless cardboard box, however this thing is pretty handy.


Take a large cardboard box and cut wholes in both sides of the box. Then cut off the entire top of the box. Next line the sides and the top with tissue paper. Be super careful not to rip the tissue because you do not want any cracks or rips that the sun light can shine through. Last line the bottom of the box with a white poster board, I did not even tape mine in I just set it inside. Now you are set to take awesome pictures.

I put my light box in direct sun light and here are the shots that I got. You can also use a lamp if you are going to be taking indoor pictures.


I made these headbands for my daughter's Easter dresses. I will have to make a tutorial on them soon because they turned out super cute.

I hope this is helpful to all you picture takers. Good luck.

Monday, May 9, 2011

Magnetic Board


I finally painted my magnetic board. I have had it for a couple years now and could never decide what color to paint it. After much debating I painted it a magenta pink! And I LOVE it! This was also my first ever glazing project. 
I picked up some wood accessories from Home Depot and used wood glue to glue them to my board. Before I painted it I used a hammer and a screw driver to beat the frame up a little bit. This step is if you are going to glaze your project then you want some dings in it to distress. Then I primed the entire board with some white paint that I had hangin around. I applied 2 coats.
After letting it dry really well I applied 2 coats of my pink paint. I chose a color from Home Depot's paint samples and had them mix me a small container of sample paint. It was plenty of paint to do the job and only cost $2.99. Sorry I have no picture of this step. Next I picked up a can of faux finish glaze, yes back to home depot yet again. The paint counter let me know that in order to tint your glaze its 3 parts glaze and
1 part color. When I got home I mixed a small amount with black and began to brush it all over my frame, making sure to get it in all of the cracks. I found with glaze that there is a perfect time to wipe it back off, usually a couple of minutes is long enough. Use a damp washcloth and wipe all of the glaze back off. This step leaves black in all the cracks and dings. Make sure not to get too far ahead of yourself with the glaze because when it does dry it is really hard to get it back off. If you are not satisfied with how it looks apply another coat. I ended up doing 2 coats on mine and the last coat almost kicked my butt, almost, I was scrubbing it off pretty hard. I am glad I started out with a small project for my first time just to get the hang of it.



Then I stuck all of my crap back on the board and I was done!



back to top